Updated Nov 19, 2026· 8 min read

Key takeaways

  • Compare the best lens caps for DSLR and mirrorless cameras, from universal stretch caps to center-pinch snap-on caps in 37mm, 52mm, and 58mm sizes.

A lens cap is a small cover that sits over the front glass of a camera lens when the lens is not in use. It keeps dust, fingerprints, and light scratches away from the front element, and it costs far less than a repair. This guide is about lens caps themselves, not about lenses. The site already covers camera lenses in depth, from wide-angle zooms to telephoto primes, but a lens is only as safe as the cap that covers it between shots.

Losing a cap is almost a rite of passage for photographers. Caps pop off in bags, roll under car seats, and vanish on windy ridgelines. The five picks below cover the most common situations: a universal stretch cap for odd sizes, two-packs for kit lenses in the most common thread sizes, a stronger single replacement, and a small-size cap for compact cameras.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

For most kit-lens owners, the JJC 58mm two-pack is the default: two center-pinch caps with keepers in the size that fits most Canon, Nikon, Fujifilm, and Panasonic kit lenses. If your lens has an unusual thread size or a hood that stays on, the KUVRD stretch cap covers a wide range of barrel diameters. Check the thread number on the lens barrel before ordering.

1. KUVRD Universal Lens Cap 2.0 Magnum

The KUVRD Universal Lens Cap 2.0 Magnum is the pick for photographers whose lenses do not share one thread size. It is a flexible silicone cover that stretches over the end of a lens barrel instead of clipping into a filter thread, so one cap can serve several lenses. The Magnum size fits lens barrels from 72mm to 122mm in diameter. It also fits over a lens hood, whether the hood is mounted for shooting or reversed for travel, which is something a rigid clip-on cap cannot do.

The silicone body creates an airtight and waterproof seal around the barrel. KUVRD backs the cap with a lifetime replacement warranty. The trade-off is speed: a stretch cap needs a firm pull to remove. For travel and dusty locations, it is a useful universal backup.

Spec Detail
Type Silicone stretch cap
Fit range 72mm to 122mm barrel diameter
Material Silicone
Seal Airtight and waterproof
Warranty Lifetime replacement
Weight Not stated

Check price on Amazon

Check price on Amazon

Check price on Amazon

Check price on Amazon

2. JJC 2-Pack 58mm Front Lens Cap

The JJC 2-Pack 58mm Front Lens Cap is the best value pick for the most common kit-lens size. The 58mm thread appears on the Canon EF-S 18-55mm kit lens, the Fujifilm XF 18-55mm, the Nikon AF-P 70-300mm, and the Panasonic Lumix 12-60mm, among others. The pack includes two center-pinch caps and two elastic cap keepers, so a lost cap is an inconvenience rather than a trip to the store.

Center-pinch caps are the most practical design for everyday use. The two spring-loaded tabs sit in the middle of the cap, so the cap can be squeezed on and off even when a lens hood is mounted. The JJC caps replace the Canon E-58 II front cap and other 58mm front caps, and the keepers tether the cap to the lens or strap.

Spec Detail
Type Center-pinch snap-on cap
Thread size 58mm
Pack contents 2 caps, 2 elastic cap keepers
Material Plastic
Replaces Canon E-58 II and other 58mm caps
Weight Not stated

3. Breakthrough Photography 58mm Snap-On Lens Cap

The Breakthrough Photography 58mm Snap-On Lens Cap is the pick for photographers who want a single replacement cap that feels more solid than the one that came in the box. It uses a center-pinch design with extra-strong springs, so the cap grips the filter thread firmly and stays on in a crowded bag.

The cap is made from recycled plastic, which is a welcome detail for photographers who care about the materials in their kit. The build quality is a step above the thinnest budget caps: the plastic is rigid, the springs feel consistent, and the cap seats with a clear click. It fits any lens with a 58mm filter thread, including Canon, Nikon, Sony, Fujifilm, and Olympus lenses, and it works with a hood mounted. The model number is 4335031115. It is a single cap, so it suits a photographer replacing one lost original rather than stocking spares.

Spec Detail
Type Center-pinch snap-on cap
Thread size 58mm
Material Recycled plastic
Springs Extra strong
Model number 4335031115
Weight Not stated

4. GAOAG 52mm 2-Pack Center Pinch Lens Cap

The GAOAG 52mm 2-Pack Center Pinch Lens Cap is the pick for Nikon kit-lens owners. The 52mm thread is the size on the Nikon AF-S 18-55mm and 55-200mm kit lenses, which ship with most Nikon DSLRs. It also fits Canon, Sony, and other lenses with a 52mm thread.

The caps use a center-squeeze snap-on design, so they attach and detach from the front of the lens without removing a hood. The pack includes two caps and leash keepers, which tether each cap to the camera and stop it from disappearing between shots. The caps are made from ABS plastic, which is light and durable enough for daily use.

Spec Detail
Type Center-pinch snap-on cap
Thread size 52mm
Pack contents 2 caps, leash keepers
Material ABS plastic
Model number NK52x2
Weight Not stated

5. JJC 2-Pack 37mm Front Lens Cap

The JJC 2-Pack 37mm Front Lens Cap is the pick for small lenses. The 37mm thread appears on compact camera lenses and on some Olympus and Panasonic kit lenses, where a standard-size cap would be far too large. Small caps are easy to lose and hard to replace, so a two-pack with keepers is the sensible way to buy them.

Like the 58mm JJC pack in this guide, the 37mm version uses a center-pinch design with a deluxe cap keeper for each cap. The pinch tabs sit in the center, so the cap can be removed with a hood in place, and the keepers attach to the lens or the camera strap to stop the cap from wandering off. The caps are made of plastic and weigh almost nothing, which suits the compact cameras they are made for.

Spec Detail
Type Center-pinch snap-on cap
Thread size 37mm
Pack contents 2 caps, deluxe cap keepers
Material Plastic
Compatibility 37mm thread lenses, Olympus, Panasonic, Canon, Nikon
Weight Not stated

How to Choose

Size comes first. The filter thread size is printed on the lens barrel, usually as a number after the diameter symbol, for example 58mm. Match the cap to that number exactly, because a cap that is one size off will not seat properly and will fall off. For lenses with no filter thread, a stretch cap like the KUVRD is the safer choice, because it grips the barrel rather than the thread.

Next, decide between a clip-on cap and a stretch cap. Clip-on caps with a center pinch are the fastest to use and the easiest to remove with a hood mounted, which is why four of the five picks in this guide use that design. Stretch caps are slower to remove but fit a wider range of barrel diameters and seal out dust and moisture better, which makes them the better choice for travel and rough conditions.

Think about loss prevention. A cap keeper or leash costs almost nothing and saves the cost of a replacement cap many times over. Two-packs are also a cheap form of insurance, because a spare in the bag is worth more than a perfect cap left at home. Original caps cost more and protect no better than a well-made third-party cap in the right size.

Who Should Skip It

Photographers who keep a UV filter on every lens and never remove it may not need a separate cap, because the filter itself guards the front element against dust and light scratches. Owners of lenses with built-in hoods that cannot take a clip-on cap should check fit carefully before ordering, because some hoods leave no room for a cap to seat.

This guide is also not for photographers who need a rear lens cap or a body cap. Rear caps protect the mount end of a detached lens, and body caps protect the sensor when no lens is mounted, and both are different products with different sizes. A cap does not weather-seal a lens: it keeps dust and fingerprints off the glass, but it does not replace a rain cover in heavy weather.

FAQ

How do I find the right lens cap size?

Look for the diameter symbol followed by a number on the lens barrel, usually near the front ring, for example 58mm. That number is the filter thread size, and the cap must match it exactly. If the marking is worn, the lens manual lists the filter size.

Can I use a lens cap with a filter or hood attached?

Yes. Center-pinch caps are designed to be removed with a hood mounted, because the tabs sit in the middle of the cap rather than on the edge. A stretch cap can also fit over a hood. Side-pinch caps are the exception, because the hood blocks access to the tabs on the edge of the cap.

Are third-party lens caps safe for my lens?

Yes, as long as the thread size matches. A third-party cap in the correct size protects the front element just as well as the original cap, because the job is simply to cover the glass and stay in place. The main differences are the logo, the feel of the springs, and the price. Check the fit on arrival and return a cap that seats loosely.

What should I do if I keep losing lens caps?

Use a cap keeper or leash, which tethers the cap to the lens or the camera strap so it cannot fall away. Buy two-packs instead of single caps, so a spare is always in the bag. Keep the spare in the same pocket every time.

Final Verdict

The JJC 58mm two-pack is the best default for most photographers, because 58mm is the most common kit-lens size and the pack includes two caps with keepers. The GAOAG 52mm two-pack plays the same role for Nikon kit-lens owners, and the JJC 37mm two-pack covers small lenses. The Breakthrough Photography cap is the best single replacement for a lens that gets used every day. The KUVRD Magnum is the pick for odd sizes, hoods that stay on, and rough conditions where a tight seal matters more than speed. Match the thread size first, then choose the design that fits how you shoot.

A
admin@88
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

How do I find the right lens cap size?
Look for the diameter symbol followed by a number on the lens barrel, usually near the front ring, for example 58mm. That number is the filter thread size, and the cap must match it exactly. If the marking is worn, the lens manual lists the filter size.
Can I use a lens cap with a filter or hood attached?
Yes. Center-pinch caps are designed to be removed with a hood mounted, because the tabs sit in the middle of the cap rather than on the edge. A stretch cap can also fit over a hood. Side-pinch caps are the exception, because the hood blocks access to the tabs on the edge of the cap.
Are third-party lens caps safe for my lens?
Yes, as long as the thread size matches. A third-party cap in the correct size protects the front element just as well as the original cap, because the job is simply to cover the glass and stay in place. The main differences are the logo, the feel of the springs, and the price. Check the fit on arrival and return a cap that seats loosely.
What should I do if I keep losing lens caps?
Use a cap keeper or leash, which tethers the cap to the lens or the camera strap so it cannot fall away. Buy two-packs instead of single caps, so a spare is always in the bag. Keep the spare in the same pocket every time.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Lens Caps to Protect DSLR and Mirrorless…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.